High End Systems SolaSpot Pro 1500, User Manual

Page: 35 / 43

Edit Scene Time
This Scene Edit option lets you set the scene time in seconds from 00.2s–99.9s. The default value is 00.3s. This values determines
how long the scene will play before the next scene is triggered.
Set Fade Time
This Scene Edit option lets you set a fade time value from 000–255. This values determines the crossfade time applied to parameters
once the scene is triggered.
Set Input by Out
This Scene Edit option allows you to capture the parameter values for a scene from DMX input into the fixture. Once you create a look
from a DMX console do the following:
l
Navigate to and select the Preset menu as shown on page 35.
l
Use the [UP],[DOWN] buttons to scroll to the Edit Scenes option and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to the Scene number you wish to build on from 1-250 and press to [Enter] select.
l
Use the [UP],[DOWN] button to scroll to the Input by Out and [Enter] press to select.
l
The scene will record the current parameter values being input via DMX.
l
When you are finished capturing DMX into a scene, press [Enter] to return to the main menu.
Edit Program
This preset menu option lets you select from 10 factory set programs to edit. You can set up to 64 Scenes in a sequence of Steps for
each program. You can also test the program at any time by selecting Program Test to playback the program as it is currently
defined.
To edit a program:
l
Navigate to and select the Preset menu.
l
Use the [UP],[DOWN] buttons to scroll to Edit Prog. menu and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to a program from Program 1–Program 10 and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to the Step in the program you want to edit from Step 1 to Step 64 and press [Enter]
to select. The display will show which scene is currently assigned to that step.
l
Use the [UP],[DOWN] buttons to scroll to the scroll to the scene you want to assign to the step and press [Enter] to select.
l
When you have assigned all the steps you want, select End and press [Enter] to save the program.
Select Program
This preset option lets you assign a Preset Program to one of three Program Partitions. A fixture assigned as a Slave can playback
any Program Partition defined by the Master fixture.
Note: The Master fixture can only playback Program Partition 1
To assign a program to each Program Partition:
l
Navigate to and select the Preset menu as shown on page 35.
l
Use the [UP],[DOWN] buttons to scroll to Select Prog menu and press [Enter] to select. Each Program Part, has 10 preset
programs.
l
Use the [UP],[DOWN] buttons to scroll to Prog. Part 1 and press [Enter] to select.
l
Use the [UP],[DOWN] buttons to scroll to a program from Program 1–Program 10 and press [Enter] to select the program
you want to include in the Program Part.
35