High End Systems SolaSpot Pro 1500, User Manual

Page: 16 / 43

Installation Instructions
l
The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety
cable.
l
Never stand directly below the device when mounting, removing or servicing the fixture.
l
The operator has to make sure the safety and technical installations are approved by an expert before tak-
ing using this fixture in the field for the first time.
l
These installations must be inspected by a skilled person once a year.
l
Overhead mounting requires extensive experience, including amongst others calculating working load lim-
its, installation material being used, and periodic safety inspection of all installation material and the device.
If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in
serious bodily injury.
Attachment Instructions.
l
Attach the Omega clamp on the bracket by tighten the M12 bolt on the bracket to the hole in the middle of the bracket.
l
Insert the quick-lock fasteners of the bracket into the respective holes on the bottom of the fixture.
l
Tighten the quick-lock fasteners fully clockwise.
l
Install the second Omega clamp.
l
Attach the safety-cable through the holes on the bottom of the base. Attach to the trussing system or other safe fixation
point.
l
Be sure the safety is fully looped, the quick-link is attached and fully tighten
l
Inspect for complete attachment before lifting over-head
16