CHAPTER 2
SHAPESHIFTER Setup and Configuration
SHAPESHIFTER User Manual
13
Powering On the Fixture
To power on the SHAPESHIFTER fixture, simply connect it to a 100V-240V AC power source.
Once the SHAPESHIFTER fixture is connected to a power source, it automatically begins a homing
procedure to verify that fixture components are functioning.
Shutting Down the Fixture
A DMX controller can shut down the fixture remotely with the Shutdown option in the Control
Channel or you can simply disconnect from power. The SHAPESHIFTER fixture automatically shuts
down in the event of DMX data loss longer than five minutes.
WARNING:
This equipment is designed for connection to a branch circuit having
a maximum overload protection of 20 A.
CAUTION:
Do not power on the fixture until
verifying
that the line cord cap is
suitable for the power source in your location. For more information,
see
Installing a Power Cord Cap
on page 6.
Disengage Pan and Tilt locks before operating the fixture. For more
information, see
Pan and Tilt Locking
on page 5.
Do not unplug motor harnesses while unit is powered.
LED Radiation. Class 2 LED product. Do not stare into beam.
