19
FUNCTIONAL INSTRUCTIONS
Installation of RCA/Audio signal cables and power supply cables.
Ensure while installation not to lead the audio cables between the head unit and the amplifier together with the power supply wires
on the same side of the vehicle. The best is a real separated installation on the left and right cable channel of the vehicle to avoid
interferences on the audio signal. This stands also for the enclosed bass-remote wire, which should not be installed together with the
power supply wires.
NOTE
8
9
10
The
SUB SONIC
controller (Subsonic filter) limits the ultralow and not hearable frequencies of the audiosignal to below, to avoid
a mechanical and electical overloading on the subwoofer. The cut-off frequency is adjustable from 15 to 55 Hz and depends on
the size of the subwoofer.
The
LINE OUT
RCA jacks are suitable to connect an additional amplifier.
The
LINE IN
RCA jacks must be connected with the RCA output jacks of the headunit.
Summary of Contents for Vulcan VXi1201
Page 1: ...BENUTZERHANDBUCH 2 OWNER S MANUAL 14 ANALOG CLASS A B MONO AMPLIFIER VXi1201...
Page 26: ...26 NOTES...
Page 27: ...27 NOTES...
