background image

Thank you for purchasing the HIFONICS BXiPRO3.0 Digital Bass 

Enhancement Processor. This unit has the ability to fine tuning bass 

width and sweep for increased sound performance. Please read the 

entire manual to ensure proper connections and application.

CAUTION

Always consider consulting a professional audio installer 

before installing any audio components. Be careful and take 

your time. Do not let wires make contact with metal edges or 

hot engine components.

Features

•  Enhances and restores the bass level
•  Screw in power and speaker connecters to chassis for secure

    connections that prevent disconnection
•  Dual function bass remote
•  Remote wire input, DC sense and music sense turn on
•  Input and output signal clip indicators 
•  Mono adjustable output level (can be controlled by bass remote) 
•  48v high level inputs  

 

 

 

 

 

•  Ability to use test tones to set input and output levels  

 

•  Fine tuning adjustability using bass width and sweep 

 

•  Fixed 4v full range output  

 

 

 

 

•  Small profile    

 

 

 

 

•  Tiffany style RCA connectors  

 

 

 

 

•  Low and high level audio inputs (speaker level inputs)
•  Balanced differential inputs (for noise reduction).

Summary of Contents for BXiPRO3.0











Reviews: