HIdRos SRH Series, Tecnical Manual, Page: 28 / 64

SRH
Swimming Pools Dehumidifiers
MTSRHGB 28 REV.072008
AIR FILTERS
WARNING: SRH units are factory supplied with a standard filter; in case of ducted installation it can be
used the filter frame (accessory); It is important to insert ALWAYS a filter on the suction side. If the filter
is not present the unit can have serious operation problems.
STANDARD FILTER AIR FILTER WITH FRAME FOR DUCTED INSTALLATIONS
The filter frame for ducted installation is supplied as accessory; the filter can be removed on both sides the opening the knobs
present on the closing panels.
PARTIAL HEAT RECOVERY HYDRAULIC CONNECTIONS (option)
The partial heat recovery allows to reject a part of the heat produced by the unit to the swimming pool water, thus enabling neutral air
temperature operation. The water connections are reported in the enclosed dimensional drawings. In the heat recovery hydraulic
circuit it has to be installed a water pump (not supplied with the unit).
HOT WATER COIL HYDRAULIC CONNECTIONS (option
)
The Hot water coil allows swimming pool water heating. In the hot water coil hydraulic circuit it has to be installed a circulating pump
and a three way modulating valve (components available as accessories). The water connections are on the top of the unit (see
enclosed dimensional drawings).