ref: MA-UF-0002-EN-V14.0-ATHENEA.pdf
6
water should flow, then the pressure reducer inlet will be the way the ar-
row is pointing)
c. Connect the
⅜
” tube (Figure-3) to the pressure reducer outlet (Figure
10); to do so, you must remove the blue security clip which is on the out-
let of the pressure reducer and insert the tube fully. Once you have in-
troduced the
⅜
” tube, replace the
⅜
” plastic clip.
d. You must connect the other end of the
⅜
” tube
to the inlet of the Ultrafiltration system (Figure-
1) where it’s marked “IN”, inserting it fully. Once
inserted, place the
⅜
” security clip on it.
e. Screw the faucet adapter (figure 7) to the faucet plac-
ing the supplied O-Ring between the adapter and the
stud. Insert
⅜
” tube through this adapter’s nut and
⅜
”
sleeve then insert a
⅜
” plastic insert (Figure-6) in that
end on the tube. Then you must insert that end in the
faucet’s adapt-er and tighten the nut with the help of a
wrench (Our reference: OI-0207-128, not supplied
with the system) or a spanner.
f. You must connect the other end of the
⅜
” tube to
the ultrafiltration system outlet “FAUCET” where it’s
marked “FAUCET” (Inlet). To do so, you must insert
the
⅜
” tube.