2
|
P a g e
All rights reserved. O&OE. © Hideaway Beds 2019.
SwingAway Vertical Wall Bed Assembly Instructions
The SwingAway (CEVNT) systems are vertically mounted wall beds that stand alone on their own sub-
frame, which must be fixed to the floor and wall. The bed can be mounted in a recess or cabinet using
bi-folding doors, concealed using a curtain etc. or left on view. NOTE: Doors cannot be fixed to the base
of a SwingAway Bed. The counter balanced mechanism is suitable for use with most standard sized
mattresses. Maximum mattress depth is 8”.
Note: it is essential that the bed assembly is securely fixed to floor and / or
wall with correct fixings. Do not try to pull the bed down into the
horizontal position unless it is fixed and always use the pull handle. Risk of
injury may occur if wall bed is not correctly secured.
Important
•
If packaging is damaged, check bed frame for any damages and all components are present. If
any items are missing contact your retailer immediately.
•
Please take time to read these instructions fully before attempting assembly of the SwingAway
wallbed.
•
The SwingAway must be fixed to the floor and wall. Failure to do so could be dangerous!
•
Do not attempt to operate the bed prior to securely fixing in place.
Tools Required
•
5mm & 4mm Allen Key
•
13mm &10mm Spanner
Note:
The bolts supplied have square shoulders, which are designed to pull into the round holes in the
frame when tightened.
Component List (See Figs 1, 2 & 3 Attached)
•
1 X Bed Frame (In 2 Pieces) ‘A’ & ‘B’
•
2 X Bed Frame Joining Bars ‘C’ &’D’ (1X Additional Central Bar On Double Beds).
•
2 X Sprung Counterbalanced Units ‘E’ & ‘F’
•
2 X Wall Brackets ‘G’
•
2 X Sub-Frames ‘H’ & ‘I’
