Maintanance
1.Water surface
2.Lowest water level
5. Fill the tank with fresh water to above the level of the anti-cavitation plate.
CAUTION
If the fresh water level is below the level of the anti-cavitation plate, or if the water supply is
insufficient, engine seizure may occur.
6. Run the engine at a fast idle for a few minutes in neutral position.
WARNING
• Do not touch or remove electrical parts when starting or during operation.
• Keep hands, hair, and clothes away from the flywheel and other rotating parts while the engine is
running.
7. Just prior to turning off the engine, quickly spray “Fogging Oil” into each carburetor. When
properly done, the engine will smoke excessively and almost stall.
NOTE:
Cooling system flushing is essential to prevent the cooling system from clogging up with salt,
sand, or dirt. In addition, fogging/lubricating of the engine is mandatory to prevent excessive
engine damage due to rust. Perform the flushing and fogging at the same time.
8. If “Fogging Oil” is not available, run the engine at a fast idle until the fuel system empties and
the engine stops.
9. Loosen the air vent screw by one turn.
10. Remove the grommet. Place a container under the carburetor drain hole to catch the gasoline,
and then drain screw.
31