Photocard printer Setup
v.1.0
5
3.0 SET UP THE PHOTO CARD PRINTER
Installing the consummables
FARGO Direct-to-Card Printers require highly specialized supplies to function properly.
The FARGO DTC1250e Card Printer uses a one piece, disposable ribbon cartridge system.
To maximize printer durability, reliability and printed card quality, only FARGO-certified supplies must be used.
For this reason, your FARGO warranty is void, where not prohibited by law, if you use non-FARGO-certified
supplies.
Printer cleaning is recommended with each ribbon change to ensure quality printed cards.
Installing the Ribbon
1.
Pull open front cover.
2.
Remove the protective paper on the sticker roll
3.
Insert the print ribbon cartridge into the printer.
4.
Close the front cover.
Loading the cards
1.
Open the input card hopper door.
2.
Press the card hopper load lever down until the card tray locks into place.
