HiBoost F20-5S, User Manual

Page: 13 / 24

13
Step 1. Drill a hole in the ceiling.
Step 2. Unscrew a fixing nut from the antenna. Pass the antenna cable through
the hole. Screw the fixing nut back onto the antenna, leaving the cable
in the ceiling crawl space, and fasten.
Step 3. Connect N-male cable to the cable connector on omni ceiling antenna.
Step 4. Tighten fixing nut to secure the antenna. Do not over tighten.
Step 1. Select an indoor location near to a power outlet on a wall.
Step 2. Mount the booster with the screws included as shown in the figure.
Step 3. Connect the outdoor antenna cables to booster connector marked
"outdoor". Tighten the connection with hand or wrench.
Step 4. Connect indoor antenna cables to booster connector marked "indoor".
Tighten the connection with hand or wrench.
Step 5. Connect AC power cord to the signal booster, and then connect the
plug to the electrical outlet to power on the booster.
2. Install the signal booster
Overview:
The booster has quite intelligent startup system, booster
commissioning is an automatic process to guarantee its optimal performance.
4. Booster Commissioning
After finishing the booster system installation, please power on the booster, the
https://www.signalbooster.com/ | 1-855-846-2654 | order@signalbooster.com