29
Two requests of indoor antenna install
A. Radiation shall be good enough to cover the whole room
B. Loop back shall be avoided
2) After finding the location, hold it there, and ask the other person to watch the Alarm LED color
to check if it is blue or near orange or not. If not, adjust the position of indoor antenna firstly, or
then adjust the outdoor antenna to make LED stay blue, then the gain value reaches or
near Maximum 60dB.
Keep in Mind:
Make sure the Alarm LED color keep blue,as this will ensure a better gain, otherwise it
will seriously affect the performance of the booster. This point is particularly important.
Alarm (ISO) LED
solid blue
below full output power
full output power
slow flashing blue
quick flashing blue
quick flashing red
output power is too high
LED STATUS INDICATORS
Bluetooth LED
Wi-Fi LED
slow flashing blue
quick flashing blue
solid blue
slow flashing blue
bluetooth disconnected
bluetooth connected
wifi disconnected
wifi connected
booster will automatically shut
down excessive downlink signal
LED lights indicate the gain level and booster status.
Summary of Contents for Band 12
Page 19: ...17 Wall mount Use the brackets in package to install on booster and wall separately...
Page 30: ...28 Wall mount Use the brackets in package to install on booster and wall separately...
Page 41: ...3150 Premier Drive Suite 130 Irving TX 75063 972 870 5666 service hiboost com www hiboost com...
