Hi-Tech SB-2009, Manual

Page: 3 / 8

SPECIFICATIONS
1. Weight: 190 lbs. dry.
2. Height: 37-1/2”. Width: 21-1/2”. Length: 21”
3. Motor: 1/2HP DC Gear motor w/separate heat sink, RPM: 0 - 500, Volts: 90-130,
Torque: 202 In. Lbs., Amps: 5.5. Power: 110 Volt
4. Pumps: Cast iron dual internal rotary gear pumps
5. Tanks: 3 gallon, 14 gauge 304 stainless steel (ss) tanks w/ss lids, w/custom welded ss
mounting nipples for ss suction line strainers and pump mounts, attached to frame with ss
worm gear clamps
6.
Hoses: 3/8” x 10’ stainless steel braided hoses coupled with a protective sleeve
7. Wheels: 3” non-marring gray balloon cushion wheels - swivel wheels have brakes
8. Dispensing Unit: Extended lightweight aluminum handle with a dual port manifold,
thumb operated on/off switch and speed control knob
9. Viscosity: 50 – 2,000 cps. Flow Rate: 1 gallon per minute
10. Ratios: 1:1, easily geared to other ratios
SIX MONTH LIMITED WARRANTY
Hi-Tech Systems (HTS) will repair or replace, at its expense and its option, any part of the
SB2009 Pump, which in the course of normal use has proven to be defective in workmanship or
material, provided that the customer returns the product prepaid to HTS within six (6) months
from the date of the original purchase and provides HTS with a reasonable opportunity to verify
the alleged defect by inspection. Parts may need to be sent to the manufacturer for inspection
and repair or replacement. HTS will not be responsible for any asserted defect, which has
resulted from misuse, abuse or repair or alteration made or specifically authorized by anyone
other than HTS. Under no circumstances will HTS be liable for incidental or consequential
damages resulting from defective products. This warranty is HTS’s sole warranty and sets forth
the customer’s exclusive remedy, with respect to defective products; all other warranties, express
or implied, whether or merchantability, fitness for purpose, or otherwise, are expressly
disclaimed by HTS.
SCHEMATICS
HANDLE: