Hi-Tech Diamond All-U-Need Instruction Manual Download Page 13

Page: 13 / 16

These diamond smoothing discs offer a variety of grits used to grind and pre-polish your stones.

Using a propriety technique, a high concentration of diamond is loaded into each disc to provide an

extremely aggressive grinding rate, yet leaving an exceptionally smooth surface finish. They are

used on our All-U-Need, Slant Cabber and many other lap machines.

Diamond Smoothing Disc Kits Include:

One 325#, One 600#, One 1200#, One Tech-10 Polish Pad, One 14K Diamond Compound Syringe

DIAMETER SIZE & GRIT

PRODUCT ID

6” - 220# Diamond Smoothing Disc 30-021
6” - 325# Diamond Smoothing Disc

30-023

6” - 600# Diamond Smoothing Disc

30-025

6” - 1200# Diamond Smoothing Disc

30-027

6” - 3000# Diamond Smoothing Disc

30-035

6” - Diamond Smoothing Disc Kit (without backing plates)

30-300

6” - Diamond Smoothing Disc Kit (with four backing plates)

30-370

8” - 220# Diamond Smoothing Disc

30-121

8” - 325# Diamond Smoothing Disc

30-123

8” - 600# Diamond Smoothing Disc

30-125

8” - 1200# Diamond Smoothing Disc

30-127

8” - 3000# Diamond Smoothing Disc

30-135

8” - Diamond Smoothing Disc Kit (without backing plates)

30-310

8” - Diamond Smoothing Disc Kit (with four backing plates)

30-375

Optional Accessories

Diamond Smoothing Discs

Summary of Contents for All-U-Need

















Search results

Summary of Contents for All-U-Need

Reviews:

Related manuals for All-U-Need

Brands by name

Popular brands

Hi-Tech Diamond All-U-Need, Instruction Manual

Search results

Summary of Contents for All-U-Need

Reviews:

Related manuals for All-U-Need

Brands by name

Popular brands