- 42 -
【
Procedure
Procedure
Procedure
Procedure of
of
of
of dist
dist
dist
dist1
1
1
1 offset
offset
offset
offset m
m
m
measurement
easurement
easurement
easurement
】
1.
1.
1.
1.
Input the known offset
distance.
2.
2.
2.
2.
Aim at the prism to start
EDM, if you
need the
coordinate
of
A0,
you
should set the height of
prism to zero. If you need
the coordinate of A1 you
should set the height of
prism to the real height.
3.
3.
3.
3.
The result is shown as
the picture on the left. Press
F4:[Enter] to accept the
result.
4.
4.
4.
4.
The result of target point
is shown as the picture on
the left. If you wish to
display coordinate then you
must press [CORD]
,
or if
you wish display distance
then
you
must
press
[DIST]
.
5.
5.
5.
5.
When
you
press
F1:[Next]
,
you
will
be
informed to save the result,
if necessary you can press
[Save] to save the result.
Offset(dist1)-Distance
Left(-)/Right(+)OSD:
m
Front(-)/)OSD:
B.S
Clear
Enter
Offset(dist1)-Prism
HR:
356°50’27"
SD:
HD:
VD:
Meas T.H
Mode
Offset(dist1)-Prism
HR:
356°50’27"
SD:
4.387
HD:
4.373
VD:
0.855
Meas
Mode Enter
Offset(dist1)-Result
HR:
31°40’09"
SD:
14.902
HD:
9.193
VD:
0.855
Next
Save
All manuals and user guides at all-guides.com
all-guides.com