Hi-Target SL300 series, Manual

Page: 14 / 19

Figure
3-1
“ ESC ”
exit button : short pressit on boot-up state, means to cancel or exit the current window
operation.
“ ENT ”
Confirm button : ok button.
Switch machinebutton/backlight control button : long press it for more than 3 seconds
to turns on/off it. On boot-up state, hold the button for 1 second, switch on or off the
backlight .
Navigation button : move the cursor, to choice the options content.
MicroSD card
Can be used for storage of the collected data and program files. Program installation package can
be installed to program MicroSD card, just as installed in system disk space.
Power supply system
◊
The battery installation and removal
Install the battery, contact the battery with a metal connector on one end with
SL300 series high
precision mobile GIS product
battery jar copper point, and screw up the screw.
Take out the battery,take out the screw firstly, the battery will popup little, then you can take it out.
Notice: when
Qstar series high precision mobile GIS product
is not in work
temporarily, please close a backlight to save electricity, to extend industrial
GIS data collector work time.
Note: the MicroSD cards (also named TF card) are small volume external flash memory
storage expansion CARDS, usually used in mobile phone, PDA, users should distinguish it
between the common SD card. The volume of ordinary SD card are larger than the
MicroSD card, not suitable for
Qstar series high precision mobile GIS product
.
Qstar
series high precision mobile GIS product
can support 32 GB MicroSD card at most for
present.