![Hi Sharp NB6321 Quick Manual Download Page 7](http://html1.mh-extra.com/html/hi-sharp/nb6321/nb6321_quick-manual_2128768007.webp)
7
1.4 Mouse Control
Live Preview & Playback interface
In the live preview & playback interface, double click on any camera window to show the window in single screen mode;
double click the window again to restore it to the previous size.
In the live preview & playback interface, if the interfaces display in full screen, move the mouse to the bottom of the interface
to pop up a tool bar. The tool bar will disappear automatically after you move the mouse away from it for some time; move the
mouse to the right side of the interface to pop up a panel and the panel will disappear automatically after you move the
mouse away from it.
Text-input
Move the mouse to the text-input box and then click the box. The input keyboard will pop up automatically.
2. Basic Operation
Please make sure all the connections are done properly before you power on the unit. Proper startup and
shutdown are crucial to expending the life of your device.
2.1 Startup
Step1: Connect the output display device to the VGA/HDMI interface of the NVR.
Step2: Connect with the mouse and power. The device will boot and the power LED would turn blue.
Step3: A WIZARD window will pop up (you should select the display language the first time you use the NVR).
2.2 Shutdown
You can power off the device by using remote controller or mouse.
By remote controller:
Step1: Press Power button. This will take you to a shutdown window.
The unit will power off after a while by clicking “OK” button.
Step2: Disconnect the power.
By mouse:
Step1: Click Start
Shutdown to pop up the Shutdown window. Select “Shutdown” in the window.
The unit will power off after a while
by clicking “OK” button.
Step2: Disconnect the power.
2.3 Wizard setup
You can quickly configure the NVR by wizard setup to make the NVR work normally. You must configure the