13
The setup panel includes seven modules. Each module provides some function entries with links for convenient
operation.
3. Camera Management
3.1 Add camera
The network of the NVR should be set before adding IP camera. Refer to the pictures below. Click Add Camera
in the setup panel or
in the top right
corner of the preview window to pop up the “Add Camera” window as
shown below. You can quickly add or add the IP camera manually.
3.1.1 Quickly add
Check the cameras and then click “Add” to add cameras. Click
to edit the camera’s IP address, username
and password and so on. Click “Default Password” to set the default username and password of each camera.
3.1.1 Add manually
Input the IP address, port, username and password of the camera a
nd then select the protocol. Click “Test” to
test the effectiveness of the input information and then click “Add” button (you can input one camera’s
information or above such as IP address, username and password before
clicking “Add” button). Click
to
d
elete the camera. Click “Default Password” to set the default username and password of each camera.
