SPECIFICATION
11
IMAGE SENSOR
1/3
”
COLOR CCD SENSOR INTERLINE
Effective Pixels
NTSC:537(H) x 505(V)
PAL:537(H) x 597(V)
Effective Pixels
NTSC:510(H) x 492(V)
PAL:500(H) x 582(V)
Synchronizing system
2
：
1 Internal
Scanning system
NTSC 525 lines/ 60 fields
PAL 625 lines / 50 fields
Video Output
1.0 Vp-p / 75 ohms
composite
Electronic Shutter
Auto Electronic Shutter
(1/60~1/100000 sec) NTSC, (1/50~1/100000 sec) PAL
Lens
Board Lens 6.0mm,
Horizontal Resolution
420 TV Lines
S/N Ration
More than 48dB (AGC OFF)
Minimum Illumination
0.05 lux color
Auto White Balance
2400
°
K~9400
°
K
Weatherproof
IP65
IR Distance
15M(12pcs IR LED)
IR Trigger
13LUX / 15LUX IR ON / OFF
White light Distance
<10M
White light trigger
8LUX
Motion detect range
3M
Motion detect
Light Change / picture change
PIR detect range
7M
PIR detect
temperature
X-Y-Z Position
P-T-T (Pan-Tilt Twist)
Power Supply
±
10
﹪
DC12V / 1A
Power Consumption
3.
１２
W (Max)
Current
260mA (Max)
Weight
N.W./G.W.:0.66kg / 0.815kg
Dimension
120mm x 99.1mm
Operating Temp
-10 to 50 (14 to 122 )
℃
℉
Storage Temp
-12 to 70
℃
(-4 to 158 )
℉
10
DIMENSION
1.
Camera detection will need 30 second
’
s to stable in the first time plug in
power. At this time, please make sure no people and heat are around the
detected areas of camera range. It can to avoid wrong detection.
2.
The detection mode will be the Monitoring mode for factory default.
3.
After use remote controller set up mode type, camera will auto
memorized the setting even if the power failure reopen.
4.
The white light blink times depends on detect mode after power on.
5.
When set up to motion detect mode, obvious and fast change of light will
switch on the white light, the equal result of detected actual motion.
Therefore, base on the actual environment to proper set up camera to
have best result will be suggested.
6.
Remote controller is optional.
9
Camera installation
Optional
85-CW8301-A002G -B