Hi Sharp HS-CW8301, Manual, Page: 2 / 3

２．
Set up detection mode:
Stairs Mode:
Set up: Press “ SET ” button on remote controller,
and then press number button “ 1 ” .
The white light blink once after press “ 1 ”
Note: User needs to press “ 1 ” button after “ SET ”
In 5 seconds. Else, the setting is cancel
Detect range:
Application:
Indoor / long distance / somewhere need sensitive sensor.
Eg. : Stairs / office / factory / in house
Surveillance Mode:
Set up: Press “ SET ” button on remote controller,
and then press number button “ 2 ” .
The white light blink once after press “ 2 ”
Note: User needs to press “ 2 ” button after “ SET ”
In 5 seconds. Else, the setting is cancel
Detect range:
Application:
Outdoor, somewhere need high accuracy sensor, within 3M distance
Eg. : Corridor / front door / back door / under the roof
6
PIR Detect Mode:
Set up: Press “ SET ” button on remote controller,
and then press number button “ 3 ” .
The white light blink once after press “ 3 ”
Note: User needs to press “ 3 ” button after “ SET ”
In 5 seconds. Else, the setting is cancel
Detect range:
Application:
Indoor / outdoor / long distance sensor
Eg. : Corridor / front door / back door / under the roof / stairs /
office / factory / in house
Motion detected Mode
Set up: Press “ SET ” button on remote controller,
and then press number button “ 4 ” .
The white light blink once after press “ 4 ”
Note: User needs to press “ 3 ” button after “ SET ”
In 5 seconds. Else, the setting is cancel
Detect range:
Application:
Indoor, Eg. : Stairs / office / factory / in house
Power and video output JACK
：
DC JACK is for the power in, it is necessary to use a constant
voltage adapter , F(BNC) JACK is for video input.
Set up
：
１．
Please set the detect area
in the center of lens range
5
7
8
IR trigger
If camera located is a un-limit condition, IR active when Lux is lower than 13
IR closed when Lux is higher than 15.
White light trigger
According to the camera detection mode:
Mode1 : Stairs Mode
Mode2: Surveillance Mode
Mode3: PIR Detect Mode
Mode4: Motion Mode
PIR detect condition
：
１．
The temperate object is moving from outside come into detect range.
２．
The temperate object such as “ humans ” , “ cats ” , “ dogs ” , will be
detected. Moving car with high temperature will also be detected.
Motion conditions
1. Within camera lens range when Illumination dark or bright exchange
2. Within camera lens range when any moving object in 3M range includes
people / animals / vehicles / plants movement by the wind / raining, etc.
3. To avoid motion detection error, the motion system is set to be trigger
within 2.5M of an adult shape with minor movement, when motion is
between 2.5-5M, it needs bigger movement to trigger the detection.
White light duration time
In the night, white light is active if any moving object is under motion detect.
Duration time is 15 seconds; the duration will last 15 seconds for each
motion detection and will continue until the last motion is detected
IR & White light active
3M
58
°
58
°
3M
7M
0.9M
0.9M
7M
4M
35 °
3M
58
°
Note: - - - - line means within PIR detect range.
Line means motion detect range.
DC JACK
DC 12V Power In
F( BNC) JACK VIDEO
Video Output
+ -
N.G
OK