27
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button
to exit current interface.
Definitions and descriptions of network stream:
Parameter
Meaning
FPS
Range from: 1-12(PAL) /1-15(NTSC)
Resolution
Support CIF
Quality
The quality of the clients’ image. The higher the value is, the
clearer the record image. Six options: lowest, lower, low,
medium, higher and highest.
Encode
VBR and CBR
Max bit
rate
Range from: 32, 64, 128, 256, 384, 512, 768 kbps
3.6.3 Email
Step1: enter into system configuration
network configuration
email; refer to Fig 4-31:
Fig 4-31 network configuration-email
SMTP Server/Port:
the name and port number of SMTP server.
If your SMTP server supports the secure connection (SSL), like Gmail, please set the “Port” to 465 and check
“SSL Check”
Send address/password:
sender’s email address/password
Receive address:
receiver’s email address. Here user can add at least three mail addresses.
Click TEST button to test the valid of the mailbox.
Attaching image amount:
user can attach at most three images at one time.
Snap Time Interval(s):
User can select snap time interval.
“Strongly recommend to use Google mail (gmail)”
For Example:
SMTP Server: smtp.gmail.com
Port: 465
SSL Check: V
Send Address:
Receive Address1:
3.6.4 Other settings
Step1: enable DDNS server: user needs to input user name
,
password and host domain name of the
registered website, click TEST to test the effectively of relevant information.