21
EN
Firewall
Multi-level safety barrier that prevents ab-
normal and unsafe conditions
Optimization
Stabilizes internal battery chemistry for in-
creased performance and longevity
Maintenance Plus
Keeps the battery fully charged without over-
charging allowing the charger to be safely
connected indefinitely
Energy Save
Minimizes energy consumption when full
power is not needed
Load Tracking
Charge LEDs dynamically track the
batteries state-of-charge when a load
outpaces the charge current
Diagnostics
Intuitive visual diagnostic tool for detecting
reverse polarity, low-voltage or damaged
batteries
CANBUS
Automatically enables the charging port to
charge CANBUS systems
Thermal Monitor
Internal temperature sensors adjust charge
based on ambient climate
1
2
3
4
5
6
7
8
Analyz
e
Step
Voltage (V)
Current (A)
Initializ
e
Diagnose
Bulk
Optimization
Reco
ver
y
Absorption Maintenance
Step 1 & 2:
Analyze & Diagnose
Checks the battery’s initial condition, including voltage,
state-of-charge and health, to determine if the battery is
stable before charging.
Step 3:
Recovery
Initializes the Recovery desulfation process (if needed)
for deeply discharged or sulfated batteries by pulsing
small amounts of current.
Step 4:
Initialize
Starts the charging process with a gentle (soft) charge.
Step 5:
Bulk
Begins the Bulk charging process based on the
condition of the battery and returns 80% of the battery’s
capacity.
Step 6:
Absorption
Brings the charge level to 90% by delivering small
amounts of current to provide a safe, efficient charge.
This limits battery gassing and is essential to prolong-
ing battery life.
Step 7:
Optimization
Finalizes the charging process and brings the battery
to maximum capacity. In this step, the charger utilizes
multi-layered charging profiles to fully recapture capac-
ity and optimize the specific gravity of the battery for
increased run time and performance. The charger will
switch to Maintenance if the battery tells the charger
that more current is needed.
CHARGING STEPS
