6
3. Gently lay the stove on its back. Remove screws from four corners of base and fit one of the
legs to each corner of the stove. Tighten bolt to ensure leg is secure to base of stove. When
complete, gently stand the stove upright.
4. Remove hob and lay it upside down on soft surface. Remove hob blanking plate from
underside of hob by taking out two screws.
5. Move the stove into position.
Do not drag the stove as this may damage the legs.
In the unlikely event that something is missing, please contact your dealer immediately.
The floor protection
If the stove is to be installed on a combustible floor, it must be placed on a non-combustible
he
arth pad. In the USA, the floor protector must extend 8” (203.2mm) beyond each side of the
fuel loading door and 16” to the front (18” [457.2 mm] to the front in Canada). (See fig. 4)
Floor protection under the stove must be a UL 1618 Type 1 Ember Protector composed of non-
combustible material for protection from radiant heat, sparks and embers.
Individual sections of floor protection must be mortared together to prevent sparks from falling
through to combustible materials. Any carpeting must be removed from under the floor
protection.
16”
