PACKING LIST
As soon as you receive your new stove please check
that you have a full set of components as set out in
the list below. In the unlikely event of a shortage,
please report this immediately to the dealer you
bought the stove from. Never attempt to operate the
stove with missing or damaged components.
Product Information
A
This Instruction Booklet and Warranty Card
B
Stove Serial Number
Stove Components
C
Handle Cover and Handle Cover Securing Bolt
D
Locking Bolt and Retaining Clamp for top fixing
E
Outer Flue Spigot / Plate
F
Ash Lip
G
Screw and Anchor for base fixing
H
Fire Grate and integral Log Bar (in place)
I
Cast Iron Firebricks – Left, Right and Back (in place)
J
Baffle Plate (Located inside roof of fire chamber)
Equipment
K
Shaped Ash Pan
L
Operating Tool
Tool Bag
M
Safety Mitten
G
Spare Glass Retaining Clips
G
Spare Glass Retaining Clip Screws
G
Allen key (for door hinges)
M
Spare Door Rope Seal
ASSEMBLING THE STOVE
Your new inset stove is extremely heavy. Always
handle with care and make sure that you have
additional strong help when you move it.
The door and door handle, should never be used to
grip the stove as they could be damaged from
supporting the stove’s weight. Items, such as the cast
iron fire bricks, fire grate and baffle plate can all be
easily removed to help reduce the weight. Under no
circumstances should the door be removed as this will
invalidate your Graphite Warranty.
Always lift the stove to finally position it.
Alternatively it may be possible to place the stove on
heavy duty plastic sheeting or thick floor covering to
slide the stove into position, being careful not to
damage any finished floor or decorative hearth
surfaces with trapped grit or building debris.
• Unpack
Remove your new stove from its recyclable
packaging. Retain this until the stove is installed and is
fully operational. Unfasten retaining wires and remove
any components, including those inside the ash pan,
from inside the stove.
• Inspect
Please inspect the stove to check that it
has not been damaged in transit – never attempt to
install a stove which has been damaged. If damage is
suspected then report this immediately to your stove
dealer.
F
I
I
I
J
D
E
C
H
K
M
G
B
L
A
5
