Designed and Engineered in the UK by HH Electronics LTD.
© 2021 HH Electronics Ltd
LINE ARRAY
ARRAY
4
KIT CONTENTS
FLYING BRACKET TO TNA-1200S
The TNA-BRK1 flying bracket for use with the TNA-1200S and TNA-2051. With its
solid steel construction, the TNA-BRK1 securely supports up to two TNA-1200S
and eight TNA-2051 enclosures simultaneously.
The
TNA-BRK1
is attached to the TNA-1200S using two Side Brackets and one Rear Bracket.
As with the TNA-1200S, spring washers
must be used with all screws!
Spring washers must be used with each screw!
Be extremely careful to not cross thread the side screws when filling the brackets!
TNA-BRK1 - FLYING BRACKET
FLYING BRACKET TO TNA-2051
LOCKNUT
SPRING WASHER
SPRING WASHER
REAR BRACKET
LOCKNUT
SPRING WASHER
SIDE BRACKET
1 x Lift Bracket assembly
3 x D-shackle
2 x Side plate
1 x Rear plate
7 x M8x25mm connector bolt
6 x M8 lock nuts
7 x Spring washers
LOCKNUT
SPRING WASHER
SIDE BRACKET
SPRING WASHER
SPRING WASHER
A TNA-2051 requires the use of Side Brackets only.
