WWW.HHELECTRONICS.COM
A:
Tripod/pole mounting - via the 35mm pole socket.
E:
Freestanding - on the ground.
B:
Pole on sub.
The intuitive design of the Tensor cabinets provide user flexibility and a product that will serve in
many situations:
D:
Flown horizontally.
C:
Flown vertically.
F:
Monitor mode - the cabinets shape allows for horizontal/angled position on stage.
CONFIGURATIONS
IMPORTANT
POLE MOUNT:
Don't over-extend poles/tripods; ensure at least 4 x the pole diameter is still inside
the outer pole. Make sure the legs have a good splay on tripods, but do not obstruct doorways or
other access-ways. Make sure that the thumb screw on the cabinet is tight.
The rigging or suspended mounting of these speakers can expose members of the public to serious health
risks or even death. Under no circumstances attempt to rig, suspend or otherwise mount this system unless
you are fully qualified and certified to do so by relevant local, state and national authorities. All relevant
safety regulations must be followed. If you are not properly qualified or do not know of pertinent
regulations, consult qualified personnel for advice and assistance.
If you are not qualified, leave it to somebody who is. Failure to do so could result in serious injury or
death!
SUSPENDED
: Tensor cabinets are fitted with M8 flying points for installation and suspended use.
Note: the suspension or 'flying' of cabinets should be performed only by properly qualified persons, in
compliance with all local laws and using approved hardware.
A
F
B
C
D
E
8
(Stand not included)
