![background image](http://html1.mh-extra.com/html/hgi-generators/wasc60-series/wasc60-series_operation-and-maintenance-manual_2128490025.webp)
Installation Guide
Harrington Generators International Ltd
Welf-Air Super Compact Installation 17 498-048 Issue
16.0 Installation Check List
# Description
√
1
Check the generator is bolted down to the floor.
2
Check the generator is pushed up to the right hand wall of the cabin and the air outlet
connection is made to the air outlet grille with the foam sealing strip making a good seal.
3
Check there is adequate clearance around the generator and in front of the service door.
4
Check the exhaust extension is securely fitted and that there is a gas tight seal around
the joins. Check that the pipe clamps are fitted and tight.
5
If alternative method used check the air outlet duct is secure with the foam seal contact
with the generator forming a good seal.
6
Check there is an adequate fresh inlet air supply through a louvre in the door or wall.
7
Check there is a high level ventilation grille or fan to keep the generator compartment
cool.
8
Check all pieces of equipment are electrically cross bonded to earth.
9
Check all fuel connections to the fuel tank ( if supplied ) are sound.
10
Check all cables and fuel pipes are adequately supported and protected.