PAGE 8
coNTrolS continued...
Data logging
NoTE: Is deactivated from new.
Data logging
NoTE: Automatic mode records data when
the pump is running. (Our recommendation
is to keep it in automatic mode when the
pump is running)
Data logging
NoTE: Manual mode allows data logging
from third party accessory. PurgeLog™
software needs to be installed on a PC,
data can then be transferred via the USB.
Pressing this button will increase the currently displayed set-point by
10 ppm. Holding this button will cause the set-point to increase in
100 ppm steps. The set-point will not increase beyond the maximum
range of the sensor.
Adjust -
Pressing this button will decrease the currently displayed set-point
by 10 ppm. Holding this button will cause the set-point to decrease
in 100 ppm steps. The minimum set-point is 10 ppm, pressing this
button when 10 ppm is displayed will disable the alarm function.
