PAGE 4
Your PurgEye
®
200 IP65 Weld Purge Monitor
®
is a hand held
IP65 rated instrument to read from 0.1% (1000 ppm) down to
0.0001% (1 ppm) oxygen.
Your PurgEye
®
200 IP65 Weld Purge Monitor
®
delivery and
storage box contains:
By following the instructions about how to use your PurgEye
®
200
IP65, you will become quickly familiar with its operation and there
should be no trial and error involved.
1.
Familiarise yourself with this manual and the PurgEye
®
200
IP65 controls.
2.
Switch on the PurgEye
®
200. See item 3 below. Continue to
learn the controls.
3.
Connect the green tubing to the filter (white connector) at the
rear of the instrument.
4.
Wait for the sensor to warm up, shown on the display. The
monitor will display dashes until it picks up a reading of 1000 ppm.
WarNINg: The monitor should not be connected directly to a high
pressure, unregulated cylinder.
gETTINg STarTED
•
The PurgEye
®
200 IP65.
•
1.2 metre long green tube with filter set.
•
Charging unit for internal battery with mains plug adaptors for
all countries.
•
PurgeNet™ lead (USB).
•
This User Instruction Manual.
