Eport-E20 Super Port User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
- 5 -
1. PRODUCT OVERVIEW
1.1. General Description
The Eport-E20 series is a fully self-contained small form-factor, most compact, integrated solution,
which provide a serial interface to Ethernet connectivity to web enable any device. The Eport-E20
integrate TCP/IP controller, memory, 10/100M Ethernet transceiver, high-speed serial port within a
compact RJ45 package and integrates a fully developed TCP/IP network stack and FreeRTOS.The
Eport-E20 also includes an embedded web server used to remotely configure, monitor, or troubleshoot
the attached device.
The Eport-E20 series using highly integrated hardware and software platform,It has been optimized for
all kinds of applications in the industrial control, smart grid , personal medical application and remote
control that have lower data rates, and transmit or receive data on an infrequent basis. By simply
adding an Eport-E20 unit to a product Design, device manufacturers can reduce their Design cycle
and speed up Time-To-Market with very low risk.
The Eport-E20 series integrates all serial to Ethernet functionality into a low-profile, 50 x 23 x 11mm
standard RJ45 module package that can be easily mounted on main PCB with application specific
circuits and even not change your original Design.
Eport-E20-PIN is Eport-E20 with PIN transformation board. The function is the same.
1.2. Device Paremeters
Table1.
Eport-E20 Series Module Technical Specifications
Item
Parameters
System Information
Processor/Frequency Cortex-M3/96MHz
Flash/SDRAM
2MB/128KB
Operating System
FreeRTOS
Ethernet Port
Port Number
1 RJ45 with LED
Interface Standard
10/100 Base-T Auto-Negotiation
Protection
1.5KV Isolation
Transformer
Integrated
Network Protocol
IP
，
TCP
，
UDP
，
DHCP
，
DNS
，
HTTP Server/Client
，
ARP,
BOOTP, AutoIP, ICMPTelnet, NTP,Modbus TCP
Security Protocol
TLS
AES 128Bit
DES3
IPV6 Support
No
Serial Port
