7) SAFETY INSTRUCTIONS
•
NEVER OPERATE THE GRINDER IF THE BEAN HOPPER IS NOT FULLY SECURED TO THE TOP BLADE HOLDER.
BEFORE REMOVING THE HOPPER FOR ANY REASON MAKE SURE TO DISCONNECT THE POWER SUPPLY.
•
AVOID CLEARING FOREIGN OBJECTS FROM THEGRINDING CHAMBER OR HOPPER WHEN THE APPLIANCE IS
PLUGGED INTO A POWER SOCKET.
•
Never attempt to insert your fingers or any foreign objects into the grinding chamber or blades.
•
Be aware that grinding blades continue rotating for a short while after the grinding operation has ended.
•
BEFORE ANY MAINTENANCE, EVEN FOR CLEANING, ALWAYS DISCONNECT THE POWER SUPPLY.
•
In the event that the appliance has a malfunction or the blades need to be replaced, get your local dealer’s
support before attempting service the grinder by yourself.
•
Do not change or tamper with the grinder.
•
Do not use the appliance barefoot or if your hands or feet are damp.
•
Do not use the cable wire to pull and disconnect the power plug.
•
Always keep the appliance dry (internally and externally).
•
Never put grinded coffee into the hopper.
•
Never attempt grinding anything else other than coffee beans.
8) MAINTENANCE AND SERVICE
Warning: All appliances’ technical handling operations, such as installation, maintenance, or service
should be performed by certified personnel or by your local dealer.
Check the state of the grinding blades periodically (approximately every 50kg of grinded coffee) Good condition
blades will result in a high quality grind and prevent the appliances over heating. Replace grinding blades every
400KG of grinded coffee (when using original replacement parts)
Be aware of the appliance’s noise level. In case the noise level is higher than normal or irregular noises are coming
from within the appliance, get certified personnel to perform an overall check of the appliance.
9) CLEANING
Before any internal cleaning procedure please follow:
•
Close the beans’ hopper’s door
•
Grind empty the left-over beans inside the grinding chamber till no grinding sound when operating the
grinder
•
DISCONNECT THE GRINDER’S POWER SUPPLY.
•
NEVER USE RUNNING WATER TO CLEAN THE MAIN BODY AND DOSER.
•
In order to keep the surface’s finish in perfect condition use only clean clothes/gentle brush/soft sponge
to clean the surface of the grinder. DO NOT USE ABRASIVE CLEANING PRODUCTS.
Cleaning the beans’ hopper
To ensure great coffee taste, clean the bean hopper periodically.
•
Make sure beans’ hopper door is closed and grinding chamber is empty.
•
Empty the beans hopper from coffee beans
•
Take off the bean hopper (by releasing Bean Hopper safety screw, Fig.4-1)
•
Place any leftover coffee beans into a dry container
•
Rinse the hopper thoroughly with water and soap
•
As the bean hopper is made of clear polymer, use abrasive-free soap liquid only and soft sponge.
•
Before reinstalling the beans hopper back to its position, make sure it is dried thoroughly.
9
©HeyCafé Co., Ltd.
Version 2.0, August 2016
