3) General Description
Fig 1 Fig 2 Fig 3
1
Beans’ hopper lid
7
Grinder’s main body
13
Residue tray
2
Beans hopper
8
Tamper
14
Hopper secure screw
3
Main switch
9
Beans’ hopper door
15
Grinding dial setting LCD
4
Signal lamp
10
Dispenser adjustment
16
Reset/Calibration button
5
Dispenser’s lid
11
Dispenser handle
17
Grinding dial
6
Dispenser
12
Filter holder fork
4) Unpacking and installing:
Warning: All appliances’ technical handling operations such as installation, maintenance, or service
should be performed by certified personnel or by your local dealer.
•
After opening the box, make sure that the grinder is intact and that there is no visible damage. If there is any
doubt, DONOT use the grinder and call your local dealer for further assistance.
•
Unpack the carton box carefully. For your convenience we suggest storing all packaging materials where they
can be used in the future, whenever the grinder’s transportation is required.
•
Place the grinder on a stable flat counter in a dry area away from water or water splashes.
•
Install the coffee residue tray and place the stainless tray on top of it.
•
Before installing the beans’ hopper, please note the correct installing position of the hopper. The grinder is
equipped with safety switch preventing the grinder from working without the hopper. There is only one
position for the hopper to fit inside the grinder where the hopper’s safety leg can activate the safety switch
inside the grinder (Fig 4.1a and Fig 4.1b)
•
Use the supplied Allen Key to fasten the hopper to the grinder’s body (Fig 4.1c) Make sure that the screw is
inserted completely through the specific hole in the hopper.
Fig 4.1a
Fig 4.1b
Fig 4.1c
3
2
1
4
5
6
7
8
13
12
11
10
9
14
15
17
16
5
©HeyCafé Co., Ltd.
Version 2.0, August 2016
