and reset outputs to control a sequencer while playing in Monophonic mode.
ACT Indicator
This LED is a status indicator for the module. It is lit when the module is first initialised and has yet
to detect a MIDI channel. When MIDI clock is being received, it blinks along with the beat which is
emitted at the
SYNC
output.
NOTE: The following 5 outputs are only present in Monophonic mode. In all other
modes they are CV/Gate outputs for the respective notes/voices...
VEL Output
This jack outputs an analogue control voltage based on the velocity of the struck note. Use it to
control filter cutoff, VCA volume, whatever you like!
MOD Output
This output produces an analogue control voltage based on the position of the mod wheel on the
input MIDI keyboard/controller.
TRIG Output
This jack outputs a short trigger pulse every time a note is struck, regardless of whether or not it
is actually a new note. You can use this output to retrigger envelopes to get
staccato
style playing
rather than the
legato
style note handling offered by the
GATE
output in Monphonic mode.
RUN/STOP Output
Use this digital output to start and stop a sequencer from a MIDI sync source. RUN = high, STOP =
low.
RESET Output
Use this digital output to reset a sequencer from a MIDI sync source. This output is active high
(RESET = high)
