Connecting the MGMT LAN port on the BMC to the manageability
network
The MGMT LAN port facilitates end-user communication to the BMC.
Prerequisites
Complete this procedure under the following conditions.
• You have a 1U RMC and you must use JViewer when installing the operating system software on the server.
For more information about JViewer, see
HPE Superdome Flex Server OS Installation Guide.
• When JViewer is required, the monarch chassis must be connected to the management LAN.
Procedure
1. Locate the chassis that contains the BMC.
The BMC is located in the lowest numbered chassis, which resides at the bottom of the rack.
2. Plug one end of an Ethernet cable into the MGMT port on the BMC. Plug the other end of the Ethernet cable into the
manageability network.
The following figure shows the rear view of the server. The MGMT port is the Ethernet port that is second from the
left.
Configuring the HPE Superdome Flex Server
17
