Hewlett Packard Enterprise ProLiant ML350 Gen10, User Manual

Page: 142 / 214

Expander port Cable part number Controller Box number SFF drive numbering:
SAS expander
Port 7
Port 8
876482-001 — Box 1 17-20
21-24
Port 9
1
— — — —
1
This port will not be used in this server.
Installing the SAS expander card
Prerequisites
Before you perform this procedure:
• Make sure that you have the latest firmware for the controllers and the expander card. To download the latest
firmware, see the Hewlett Packard Enterprise website.
• Note the port numbering on the:
◦ Controller cables
◦ SAS expander card
◦ Controller boards and drive backplanes
• Make sure you have the following items available:
◦ HPE 12G SAS expander card option kit
◦ Smart Array E-class or P-class Gen10 controller option with internal ports
◦ T-15 Torx screwdriver
Procedure
1. Remove the front bezel.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4.
Disconnect all peripheral cables from the server.
5.
Do one of the following:
• Server in tower mode: Position the tower server for hardware configuration.
• Server in rack mode: Extend the server from the rack.
6. Remove the access panel.
7. Remove the air baffle.
142
Hardware options installation