MF877-00 Page 5
Template Revision A
HPE instructions for this template are available at
•
Remove Air Valve assemblies
o
Remove 3 screws from each side. Lift out the air valve assemblies (See Figure 16)
•
Remove Fan PCAs
o
Disconnect cables to the 3 Fan PCA’s. Remove 3 screws from each fan PCA.
o
Remove PCAs (See Figure 17)
•
Unlatch DVD Cable (See Figure 18)
•
Remove Airframe screws (See Figure 19)
•
Remove Airframes and midplanes (See Figure 20)
•
Remove the busbar assemblies (Figure 21)
•
Remove power PCAs from busbar assemblies (Figure 22)
15. Remove power Supply covers
•
Locate Capacitors greater than 2.5cm (Figure 23)
•
Using a flat blade screwdriver pry capacitors from the supply; there will either be 2 or 4 per supply
•
Note: There are two types of supplies and three vendors, Figure 23 will have examples of all
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
