Hewlett Packard Enterprise Aruba 9012, Installation Manual, Page: 9 / 26

Aruba 9012 Gateway
| Installation Guide 9012 Gateway |
9
Kensington Lock Slot
The Aruba 9012 gateway is equipped with a Kensington security slot for additional security.
Power Supply
The Aruba 9012 Gateway is equipped with an integrated AC power supply of 185 W. The
integrated power supply supports an input voltage of 100 V AC to 240 V AC.
WAN WAN Connectivity Status
LAN Link Status Green (Solid) All LAN Ports Established
Amber (Solid) No LAN Ports Established
GW Mode WLAN Gateway
mode / SDWAN
Gateway mode
Green (Solid) The WLAN Gateway is Up and
Functioning.
Green (Blinking) WLAN Gateway Booting
Central/Cloud Central
Connectivity
Status
Blue (Solid) Connected to Central
Blue (Blinking) Connecting to Central
Cellular Link Status Green (Solid) Modem Initialized and Connected to
the Network. Good Signal Strength.
Signal Strength Threshold:
> -65 dBm
Green (Blinking) Modem Initializing
Green + Amber (Greenish
Yellow) (Solid)
Modem Initialized and Connected to
the Network. Average Signal Strength.
Signal Strength Threshold:
< -65 dBm
> -80 dBm
Amber (Solid) Modem Initialized and Connected to
the Network. Poor Signal Strength.
Signal Strength Threshold:
< -80 dBm
Amber (Blinking) Network Connection Failure. SIM
Removal. Modem not Responding to
Web Commands.
Red (Solid) Modem Lost IP Address or
Disconnected from the Network.
Acting as a Backup Uplink.
Red (Blinking) Hardware Failure. USB Failure.
Unsupported USB Device Attached.
Table 4
LED Status
LED Function Indicator Status