HEWI
installation instruction
M1000_117_ES5400_EN_Vers-002.pdf
M1000.117
Page 4 of 7
HEWI P.O. Box 1260 D-34442 Bad Arolsen
4. Install all neccessary connections
(power supply, relay, etc.) as shown in the
wiring plan beyond. Plug the still
connection cables into the right connector.
They fit automatically.
4a. De-Installation:
Move the lever with a small screwdriver (or
smthg. similar) and remove the cable.
5. Mount the wallreader onto the socket
using the enclosed screws. Turn the
screws carefully so that the circuit board
doesn’t become distorted. Check the
adress switch (Must not be at position „0“).
6. Plug the cover onto the wallreader. The
LED should be visible.