Hettich Steelforce Pro Highline 570 SLS, Assembly Manual

Page: 11 / 100

11
2.13 Cleaning
• Always unplug this workstation from the electrical outlet before cleaning.
• Dust the workstation frame once a week with a dry cloth.
• Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fort-
night.
2.14 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
• for the purpose for which it was intended.
• if it is completely safe to do so.
English
3 Assembly
Before attempting assembly, read the Safety Information in Section 2.
To protect components and the floor from scratches, it is advisable to use a pad before
assembly. You can, for example, use the supplied cardboard by unfolding it .

1
3.1 Pre-assembly of the Crossbars for Frame set-up for 110 cm and 120 cm
Adjust the frame into the desired width. Tighten the set screws on the crossbar with Allen
key M5.
Recommended Top Sizes
Frame set-up Width / size table top Depth / size table top Table Top Thickness
110 cm 120 cm 80 cm 2.5 cm
120 cm 130 cm 80 cm 2.5 cm
H
5
5
4
Maximum Screw Torque : 10N-m