Hettich 4050674010009QG, Operating Manual

Page: 21 / 38

EN
AB1203EN_SA Rev. 02 / 11.2022 21/38
17.3 Short-term centrifugation
Example:
RPM display (RPM) Example:
RCF display ( RCF )
RCF

Press the key to activate the RPM display
(RPM) or the RCF display ( RCF ) as
needed.
t/min:s RPM >RCF< t/min:s RPM >RCF<


Enter the desired centrifugation parameters (see the
chapter “Entering centrifugation parameters”).
t/min:s RPM >RCF< t/min:s RPM >RCF<

START
PULSE

Press the key and keep it pressed.
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.
t/min:s RPM >RCF< t/min:s RPM >RCF<

START
PULSE

Release the key again to end the
centrifugation run.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example
f .
t/min:s RPM >RCF< t/min:s RPM >RCF<
18 Emergency Stop
Example:
RPM display (RPM) Example:
RCF display ( RCF )
STOP
OPEN

Press the key twice.
During the Emergency Stop, the run-out
occurs with the “fast” brake stage (short
run-out time). Brake stage
f is
displayed.
t/min:s RPM >RCF< t/min:s RPM >RCF<