background image

15

oPErAtIng yoUr nEW APPlIAnCE

WARNING

The metal parts of the portafilter will 

be very hot. 

ESPrESSo PrESSUrE gAUgE

IdEAl ESPrESSo zonE

The gauge needle, when positioned in  

the middle zone during extraction, 

indicates the espresso will be extracted at 

the ideal pressure.

UndEr ExtrACtEd zonE

The gauge needle, when positioned in the 

lower zone during extraction, indicates 

the espresso has been extracted with 

insufficient pressure. This occurs when 

the water flow through the ground coffee is 

too fast and results in an under extracted 

espresso that is watery and lacks crema 

and flavour. 
Causes for under extraction include the grind 

being too coarse and/or insufficient coffee in 

filter basket and/or under tamping.

oVEr ExtrACtEd zonE

The gauge needle, when positioned in the 

upper zone during extraction, indicates the 

espresso has been extracted with too much 

pressure. This occurs when the water flow 

through the ground coffee is too slow and 

results in an over extracted espresso that 

is very dark and bitter with a mottled and 

uneven crema. 
Causes for over extraction include the 

grind being too fine and/or too much 

ground coffee in filter basket.

tExtUrIng mIlK

The Sage™ by Heston Blumenthal‰ Barista 

Express™ comes complete with a commercial 

style 360

˚

 stainless steel steam wand. 

WARNING

Ensure the STEAM DIAL is in the 

STANDBY position before removing 

the steam wand from the frothing jug.

Summary of Contents for Sage the Barista Express BES875UK





































Reviews: