21
Troubleshooting
Thermo protection cut-off
(temperature overload)
The mixer is equipped with a self-resetting
safety device which safeguards against
overheating the motor with excessive
loads. If overheating occurs, the mixer will
automatically activate the overheating
protection device and the motor will switch
itself off. If this occurs, turn the speed
control slider to the 0 (OFF) position,
switch the appliance off at the power
outlet and unplug the cord. Wait at least
15 minutes before restarting the mixer.
PROBLEM
EASY SOLUTION
Mixer suddenly
switches off during
mixing
•
The mixer has been stressed by overloading or stalling. The mixer will
automatically activate the overload protection device and the unit will
switch itself off. If this happens, switch the mixer off at the outlet and
unplug it for at least 15 minutes. The overload protection device will
reset once the motor has cooled, and the mixer will be ready to use again.
Mixer will not work
when switched ON
•
The temperature overload protection (thermo cut-off) device has not been
automatically reset, allow more time for the motor to cool down.
Noise is heard
when scraper beater
is mixing
•
When ingredients are in the mixing bowl, the scraper beater may make
a slight noise as it scrapes the sides and bottom of the bowl. This is normal
and should not cause concern. Do not turn the mixer on with the scraper
beater in place if the mixing bowl is empty. This will cause the scraper
beater to make a loud noise as it scrapes the bowl.
Summary of Contents for BEM430
Page 1: ...the Scraper Mixer Instruction Book BEM430 ...
Page 22: ...22 Notes ...
Page 23: ...23 Notes ...