©2019 Hestan Commercial Corporation
20
EN
GAS CONNECTIONS AND FINAL ASSEMBLY
(continued)
1. The Outdoor Living Suite is shipped with an interplumb kit to simplify connecting side burner and
grill together as shown below. HOWEVER, EACH APPLIANCE MUST BE CONNECTED TO ITS
OWN REGULATOR. DO NOT USE ONE REGULATOR FOR BOTH APPLIANCES.
2. The remaining gas connections shown above must be completed by the qualified plumber or
professional outdoor appliance installer. See reference photo on the next page for typical flex hose
and shut-off valve location. Flex hose, shut-off valve, and misc. fittings must be provided by the
homeowner and installed by the qualified plumber or professional outdoor appliance installer. The
gas regulator is supplied with the grill & side burner (or power burner).
The above image is a suggestion only. Depending on which cabinetry was selected to go beneath
the grill, it may be necessary for the plumber to route the regulator, fittings, and hoses in a different
configuration to allow for the installation of the cabinet.
At all times, the shut-off valve must be located near the left side of the suite, near the floor, so it is
easily accessible for service or emergency shut-off (see reference photos on next page).
A FULL LEAK TEST MUST BE PERFORMED ON ALL GAS CONNECTIONS & HOSES BEFORE
USING THE APPLIANCES. Refer to the appliance manuals for instructions on this very important
step.
INTERPLUMB KIT
(SUPPLIED WITH SUITE)
FLEX HOSE
& FITTINGS
(SUPPLIED BY CUSTOMER)
SHUT-OFF
VALVE
(SUPPLIED BY CUSTOMER)
INCOMING
GAS SERVICE
SUITE WITH GRILL AND SIDE BURNER
(POWER BURNER IS SIMILAR)
REGULATOR
(SUPPLIED WITH GRILL)
REGULATOR
(SUPPLIED WITH
SIDE BURNER)