HESCH HE 5697 MFC, Manual

Page: 15 / 53

Chapter 3 Device description
Device description HE 5697 MFC 15
Version 1.4
3.3 Technical data
Technical data
Intended use: The multifunctional controller is used for switching or continuous control
with sequence control and electrical measured value recording
Supply voltage: 100 to 240 V AC / 24 V DC
Transducer supply: 18 V DC / 45 mA
Power consumption: Max. 350 mA (24 V DC)
Display: Resistive touch screen; 3.5"; resolution 320 × 240 pixels QVGA
LEDs: 2 freely programmable LEDs for status indications
Buttons: 4 freely assignable buttons
Outputs: See connection areas, on page 16 et seq.
Inputs: See connection areas, on page 16 et seq.
Relay: See connection areas, on page 16 et seq.
Interfaces: Rear side: 1 × USB 2.0 host, connector type A
Front side: 1 × Mini-USB 2.0 Device, connector type B (galvanically iso-
lated)
CPU: Cortex A8, 600 MHz
Boot time: approx. 17 s
Real-time clock: Power failure buffered
Storage:

Mass storage 1 × Micro SD card (4 GByte)

DDR2 64 MByte

Flash 128 MByte

MRAM 128 kByte
Housing:

Panel mounting apparatus

Protection Class:
IP 65 on front side
IP 20 on rest of housing

Dimensions (W × H × D):
98 mm × 98 mm × 115 mm (without connector)
98 mm × 98 mm × 130 mm (with connector)
Installation:

Panel mounting

Panel cut-out: 92 mm × 92 mm (+0.8 mm tolerance)
Ambient conditions
Climatic
Storage -20 °C to +70 °C
Transport -20 °C to +70 °C
Operation 0 °C to +55 °C
Relative humidity Relative humidity 95%, no condensation allowed
Air and creepage distances
Contamination Class 2