➥
NOTE:
This procedure loads the default values into the RAM. They will be lost unless
they are written to the non-volatile memory. To write them into the non-volatile memory:
– Enter the default installer code: 123456 then
[
#
]
.
– ALARM HISTORY (MEMORIA ALLARMI) is displayed indicating that it is in the installer
program mode.
– Press [
✱
] to exit the installer program mode. This writes thedefault values to the
non-volatile memory.
User Programming
The functions available to the user are described in this section.
When the system is powered up
SET TIME/DATE
flashes to remind the user that the internal clock must be set. The clock is used to record
the time and date for each event in the alarm history. While “SET TIME/DATE” flashes,
enter the user access code: (987654 is the default code) then press
[
#
]
.
ALARM HISTORY
is displayed.
This is the first item on the user’s main menu. This and the other menu items are arranged
in the following sequence:
❐
ALARM HISTORY
❐
TIME
❐
DATE
❐
PHONE NUMBERS
❐
USER CODE
Use the
[
2
]
up arrow button and
[
8
]
down arrow button to move the menu.
Use the down arrow button
[
8
]
to move down the menu to TIME, DATE, etc. After USER
CODE, it starts over at the top at ALARM HISTORY. Similarly the up arrow button
[
2
]
can
be used to move up the menu. If the up arrow button is pressed while ALARM HISTORY
is displayed, it moves to the bottom of the menu to USER CODE.
To select the displayed item from the main menu, press the
[
#
]
button. If PHONE
NUMBERS is displayed when the
[
#
]
button is pressed, the first item on the phone numbers
menu is displayed: “TEL #1".
Informa 300 Voice Message Communicator
19