To change the message lengths
To change the value enter a 2 digit number. Use a leading 0 if 9 seconds or less. If the
entry is correct, confirm it by pressing
[
#
]
. If not correct, press the [
✱
] button to cancel, the
display blanks and a new number can be entered. Or, the installer can quit by pressing [
✱
]
again to return to the MESGx LENGTH display .
The message length must be between 1 second and a maximum which depends on the
other message length. For example, if message A has a length of 2 seconds and message
#1 has a length of 9 seconds, no more than 8 seconds can be programmed for message
#2. This leaves 1 second for message #3, an unlikely value. This is automatically checked.
If out of range, the second digit entered will not be displayed. If message #2 must be greater
than 7 seconds, first program message #1 to a value smaller than 9 seconds.
After an entry is confirmed by pressing the
[
#
]
button, it returns to the MESGx LENGTH
display.
Select another item from the message menu or return to the installer’s main menu by
pressing the [
✱
] button.
Record and playback
To record a message, use the arrow buttons to move to MESGx R# P0. Press
[
#
]
to start
the recording. A bar graph, consisting of “
✱✱✱✱
” appears in the display to show how much
time remains. Recording can continue to the end or it can be stopped early by pressing
the 0 button. When recording ends, it automatically plays the message back. The message
can be played again by pressing the 0 button. This can be repeated as often as necessary.
➥
To return to the installer’s main menu:
Press the [
✱
] button while “MESGx R# P0" or ”MESGx LENGTH" is displayed.
TIME menu
TIME and DATE are used to set the real time clock. The time and date are stored with the
alarm information in the alarm memory.
To display the current time
While TIME is displayed, press
[
#
]
to display the current time. It is in the 24 hour format:
0000 is midnight. 0723 is 7:23AM. 1350 is 1:50PM. 2359 is 11:59 PM.
To change the time
While the current time is displayed, enter the new time. Enter 4 digits for the time, 24 hour
clock format.
To confirm the entry press
[
#
]
. To cancel the entry and start over Press [
✱
]. To return to
the installer’s main menu press [
✱
] again.
12
Informa 300 Voice Message Communicator