background image

6.2.4 According to the ironing requirements, the steam gear and the temperature gear switch can be set at will so as 
to set the required gear; 

 

6.3 Ironing of clothes 
 
6.3.1 Steam ironing of clothes (rotate the nozzle into 90 degrees) 
 
Set temperature into 200

 or 180

, and the steam ironing function cannot be used at other temperature gears. The 

steam gear can be set by the user himself as required, when the temperature indicator lamp stops flashing, press the 
steam button switch to conduct ironing. During ironing, straightly pull the clothes to be ironed with one hand, hold the 
steamer with the other hand, cling the steam holes with the clothes to iron them from top to bottom, and for thicker 
clothes, it is required to iron many times. 
 
6.3.2 Ironing of clothes 
According to the fabric to be ironed, set into the appropriate temperature, place the fabric to be ironed onto the ironing 
board, slowly smooth the wrinkles with hands to iron comprehensively, and for the place with folding marks, slowly 
stretch the clothes with hands to iron slowly; 
 
During ironing, please start from a small place slowly to a large place, so that redundant wrinkles can be avoided, 
meanwhile please iron according to different cloth materials and the temperature standard on the care label, and cloth 
or a towel can be padded for ironing when necessary; 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for HG-8056















Reviews: