TW-850T
7
4. Name and Function of Each Part
①
Main body case
Main body case. POM, a highly durable material, is used.
②
Battery cap
Lid for fixing the coin battery (CR2032).
The transmitter is delivered with a coin battery installed.
③
Protective cover
Cover for protecting the internal components of the main body.
POM, a highly durable material, is used.
④
Monitor LED(green/red)
An LED for communication confirmation/battery check. It lights up/blinks
green/red according to the communication result.
⑤
Test switch
(Pairing switch)
Used for testing wireless communication or for pairing.
⑥
Harness connecting
connector
Connector for connecting the supplied cable with connector.
A wireless signal is transmitted by the work completion signal input
(No-voltage contact input) to the connector.
⑦
Buzzer hole
When the buzzer of the transmitter is activated, the sound comes out of the
hole.
⑧
Main body mounting
hole
Mounting hole for fixing the main body to a Pokayoke tool.
Four mounting holes are provided. Use M3 screws to fix the main body.
⑨
Nameplate label
Nameplate label of the product. Model No. and serial No. are indicated on
the label.
Serial No. on the label represents the ID No. of the transmitter.
①
Main body case
②
Battery cap
④
Monitor LED
⑤
Test switch(pairing switch)
③
Protective cover
⑧
Main body mounting hole
（
4 places
）
⑦
Buzzer hole
⑥
Harness connecting connector
⑨
Nameplate label
