TW-810T
11
6.Setting
The transmitter and a Pokayoke receiver TW-800R-*** need to be paired before use.
By pairing them, they recognize an identification signal from each other and communicate with each other.
This manual describes how to pair the transmitter with the receiver TW-800R.
For pairing with a receiver other than TW-800R, see the instruction manual of each receiver.
⚫
Pairing (registration)
①
Press the lighting switch for paring
of the receiver,
and turn ON the power switch
at the same time.
The lighting switch for paring blinks and the receiver enters
the pairing mode for 10 seconds
.
②
Long press
the pairing switch
of the transmitter for
3 seconds or longer.
③
The lighting switch for paring of the receiver goes out
and pairing is complete.
④
Turn OFF the power
of the receiver once and
turn it ON again
, and the receiver can communicate with the
paired transmitter.
⚫
Reset pairing
①
Press the lighting switch for paring
of the receiver, and
turn ON the power switch
at the same time.
The lighting switch for paring blinks and the receiver enters
the pairing mode for 10 seconds
.
Long press the lighting switch for paring for
2 seconds or longer
, and the
lighting switch for paring lights
up
and the paired (registered) data of the transmitter is deleted.
◆
Notes
A long press on the pairing switch of the transmitter (3 seconds or more) when the receiver is not in the pairing
mode resets the pairing with the receiver and prevents communication with the registered receiver. When pairing
is reset by mistake, perform the pairing procedure again.
Lighting switch for paring
Power switch
Pairing switch
(Test switch)
