Herth+Buss AirGuard 95990001, Operating Instruction

Page: 72 / 132

Operating Instruction 95990001
www.herthundbuss.com 72
EN
7.0 Data log for printer software
"IDtoPC"
7.1 Reading out and saving the data in
the device
This function allows you to save up to 20
data records in the device, each with the val-
ues of up to 5 wheel sensors per vehicle, and
then to transfer these to a PC using our "ID
to PC" software.
Up to 20 data records can be stored in the
data log of the device, regardless of whether
just 1 ID or up to 5 IDs of a vehicle are stored
in one data record.
TIP
Savethevaluesinyourcustomerfile
orprintthemoutforyourcustomer.
Number of wheels:
Youcanonlysavesensordatafortheprint
function
ID TO PC after setting WHEEL: 4 un-
der Settings in advance. Please first select
the value 4 for the number of wheels in the
settings menu.
Please note:
If the wheel value is set to 1 in the
settings, you can perform a normal
sensor diagnosis of a single sensor
on the vehicle. The device however only
retains the value of the last wheel sen-
sor.
Function selection:
Use the arrow buttons to select DIAGNOSE
SENSOR andpresstheenterkeyforthedi-
agnosis.
Scanning the ID of the 4 wheels:
The display will show the image of a vehi-
cle with 5 wheels (including spare wheel).
Please use the arrow buttons to select the
respectivewheelanddiagnosebypressing
theenterkey.